American Specialties Inc.

Stainless Steel Folding Utility Shelf 14-5/8"X5-13/16"

Shelf: Fabricated of #18 ga stainless steel with a #4 satin finish. Leading
edges are radiused and deburred to prevent injury.
Mounting Bracket: Fabricated of #14 ga stainless steel finished to match
shelf. All edges are deburred and have a radius.
Spring: Heavy duty internal spring will allow shelf to return to the up-right
position when not in use.
Overall Size: 14 5/8”L x 5 1/2”W

898 Mop and Broom Holder hook only.

For handles up to 1-1/4" diameter

American Specialties Lock & Key  L001 lock kit, Uses E114 key. Used on all Toilet Paper & Towel Dispensers. Lock, Key and nut included.

Retractable Ivory Phenolic Shower Seat , 18" X 16". All Folding Seats are constructed to meet ADA handicap requirements. 18 gage type 304 stainless steel frame. When properly mounted seat will support up to 250 lbs.

Roval Automatic Deck Mounted Soap Dispenser, 20333 Constructed of polished type 304 stainless steel on exposed surfaces with battery-operated, hands-free sensor. LEDs indicate function, battery condition and soap supply level on face front. Translucent tank holds 54 oz. (1600 ml) of liquid soap

The Handicap Grab Bar is fabricated of #18 gauge stainless steel with a #4 satin finish.  They are available in 1 1/4” and 1-1/2” outside diameter.  All bars maintain a constant 1 1/2” offset, which is the distance between the inside of the bar and the mounting surface.  The mounting flanges have a 3” diameter.  We offer two types of mounting,  exposed screw mounting and snap on flange concealed. When properly installed they will easily support up to 250 pounds.  The recommended height for mounting these grab bars is 33 to 36” above the finished floor, but heights vary depending on local codes.  The overall length of a 12" grab bar is 15" due to the 3" diameter flanges.  Due to the various materials that these are mounted on, screws are not included.

Retractable Ivory Phenolic Shower Seat lh, 32" X 23"
All Folding Seats are constructed to meet ADA handicap requirements. 18 gage type 304 stainless steel frame. When properly mounted seat will support up to 250 lbs.

Retractable Ivory Phenolic Shower Seat rh, 32" X 23"
All Folding Seats are constructed to meet ADA handicap requirements. 18 gage type 304 stainless steel frame. When properly mounted seat will support up to 250 lbs.

Grab Bar 30" x 33" Ht ; ADA Accessible Compartments Require: 1-1/2" diameter with concealed snap on flange 30" x 33"ht.  2nd leg sticks out 5" x 12"ht. Right hand shown, left hand is on opposite side.

Retractable White Cushion Shower Seat, 18-1/2" X 15"
All Folding Seats are constructed to meet ADA handicap requirements. 18 gage type 304 stainless steel frame. Also known as U934. Seat bottom is fabricated of 1/2" marine grade plywood for support. Cushion is 2 1/2" thick. Capable of supporting up to 250 lbs when properly mounted. All Folding Seats are constructed to meet ADA handicap requirements. 18 gage type 304 stainless steel frame. Seat: Fabricated of 2 1/2" thick, water-resistant reinforced vinyl fabric cushion (white) seamless design with all leading edges having a radius. Seat is secured to a 1/2" thick marine plywood. Tubing: Fabricated of #11 ga stainless steel with #4 satin finish. Main Frame: #18 ga 1 1/4" with satin finish tubing. Underside has no exposed fasteners. Flanges: #11 gauge stainless steel with four (4) exposed mounting points. Under slung supports have a 1 1/4" OD. (Satin finish). Mounting Bracket: #16 ga stainless steel "hat" style bracket with 4 mounting support points. Bracket acts as a guide to raise and lower seat platform and is equipped with four (4) points to secure to wall surface. For maximum support, bracket is mounted so the bottom is set on the finished floor surface. Seat will remain in an upright position when not in use by means of a spring clip. Overall Size: 1/8-1/2"W x 15"D (seating area)

ASI Roval cast iron hand dryers offers many features, Quick Dry (Under 25 Secs), No Touch (Energy Efficient), Universal Voltage (100-240 VAC & 50/60 Hz), Only Available in White, Cover made from ¼” Thick Heavy Duty Cast Iron, ADA Compliant, Durable yet Modern Design. Dimensions are 15-3⁄32"W x 11-7⁄32"H x 3-15⁄16"D (383 x 285 x 100 mm).

Toilet Grab Bar Wall Mounted ADA Accessible Compartments Require: 1-1/4" dia. bars, Exposed Mounting. Type 34 from American Specialties. Manufacture part number 3434 Straddle Grab Bar by American Specialties.

Retractable White Cushion Shower Seat lh, 32" X 22"
All Folding Seats are constructed to meet ADA handicap requirements. 18 gage type 304 stainless steel frame. Also known as U933L. Seat bottom is fabricated of 1/2" marine grade plywood for support. Cushion is 2 1/2" thick. Capable of supporting up to 250 lbs when properly mounted.

projects 3-1/8", 3" dia